VIDEO: Shower installation top tips

Becky Bates has shared her top tips for installing the Mira Decor Dual electric shower.
Watch the video below to see Becky’s install.
Top tips
- Always read the manufacturer’s instructions
- Clear away all the customer’s shampoo and other products from the area where you are working. Take a photo before you move anything so that you can place the items back exactly where you found them.
- Make sure that the bath is completely dry before you stand in it, to make sure you don’t slip.
- Check all the products and fittings in the box are all present and correct, making sure that nothing is missing, before you start.
- Use the template that the manufacturer has provided, in order to get the positioning right.
- Isolate the electrical supply at the fuse spur and also at the consumer unit before you start. Ideally, using a safety lock off kit or a padlock – you don’t want anyone else switching it back on without you knowing.
- Always use a spirit level when positioning the shower and when making fixing holes to ensure the shower is level.
- Use a tile bit when drilling into the tile. Scratch the surface of the tile first to that the drill doesn’t slip and the bit can grab on to the tile.
- Wipe away any dust after drilling so that no debris gets into the shower unit.
- When you insert the wall plug, push the wall plug behind the tile so when you come to tighten the screw you don’t crack the tile.
- Make sure all the compression nuts are tightened before turning on the water and check for any leaks.
- Give the screws in the cable connectors one last turn before you attach the shower cover.
- Ensure the cover is properly fitted by using the screws provided, both at the top and the bottom of the shower cover.
- When you come to assemble the hose and riser rail, be careful not to scratch any of the chrome.
- Give the chrome a nice polish once fitted, removing any finger prints.
- Ensure you attach and pull the hose through the retaining ring to comply with current Water Regulations.
