WATCH: RA Tech shows us how to use the hotun detect

RA Tech has shared a set of videos about the hotun detect, which alerts customers if there is an issue with the heating system.

RA Tech has shared a set of videos showing the features and benefits of the hotun detect, which alerts customers if there is an issue with the heating system.

 

The hotun detect combines both design and technical know-how to evolve dry-trap tundishes from a passive alert to a proactive warning device for boilers and unvented cylinders, to the benefit of end-users and installers alike.

“The hotun dry-trap tundish not only made it easier to route the relief valve discharge to drain, but it also made diagnosing that the valve had discharged simpler too,” explains Russell Armstrong, Managing Director at RA Tech.

 

“The hotun detect takes this a step further by audibly and visually alerting a homeowner or installer that there may be an issue with a system, if the relief valve is activated.

“By enabling this step change from passive to active warning, remedial work can be carried out before a breakdown or other serious problem, saving time and money for installers, homeowners and commercial building managers. It also works to prevent water wastage and excessive corrosion in heating systems due to make up water being continually added.”

 

The hotun detect has an electronic sensor which detects both the flow and temperature of water present in the dry-trap tundish. It then provides a visual and audible indicator, as a simple identifier for homeowners.

The unique design allows precise siting of the sensor, avoiding false alarms while still providing an alert even in a trickle flow scenario. Its clip-on design also means it can be fitted in seconds and is retrofittable onto all previously installed hotun dry trap tundishes.

 

More information on the hotun detect range can be found at www.hotun.co.uk


More Like This

View All News